| Author |
Message |
|
Ms.OwLMooN
|
 |
Post subject: Washing Stuff in Hot water | Posted: Mon Nov 16, 2020 11:59 am |
|
Joined: Mon Dec 28, 2015 3:09 am
Posts: 132
Location: New Jersey
PAP Mask: Amara View Full Face Mask
PAP Machine: Resmed AirCurve 10 VAuto
Humidifier: HumidAir Heated Humidifier
Pressure Setting: Low - 12 High - 25
|
What supplies can be washed in hot water and what can’t? I definitely know that the cushions cannot but what about tubing? I already have washed the water chamber though but I’m assuming that the clear soft silicone part that goes into the water chamber can’t either and I’m not gonna try to wash it like that but wondering about the rest of the supplies.
|
|
|
|
|
|
|
Respirator99
|
|
Post subject: Re: Washing Stuff in Hot water | Posted: Mon Nov 16, 2020 6:13 pm |
|
Joined: Mon Apr 27, 2020 1:06 am
Posts: 186
Location: Australia
PAP Mask: Resmed Airtouch F20
PAP Machine: Resmed S9 VPAP Adapt
Humidifier: Resmed H5i
Pressure Setting: Min EPAP: 8.0 Max EPAP: 11.0 PS Min: 3.0 PS Max: 8.0
|
I wash all my stuff in hot water with a bit of liquid detergent. Likewise, rinse in very hot water.
I think it's OK for everything except memory-foam cushions, which should be kept dry.
|
|
|
|
|
|
|
DeltaBravo3.8
|
|
Post subject: Re: Washing Stuff in Hot water | Posted: Mon Nov 16, 2020 10:05 pm |
|
Joined: Sat Jul 04, 2020 8:38 am
Posts: 518
Location: Waynesboro, Pennsylvania, USA
PAP Mask: F&P Vitera & Simplus, ResMed F20 N/P30i & old Amara View
PAP Machine: Trying for ResMed AirCurve 10 ST-A
Humidifier: To be included
Pressure Setting: Will run iVAPS, ResMed's variant on AVAPS
|
Yup ditto. I wash all the hoses, humidifier tub, and cushions in hot water and Dawn dish soap.
I soak the parts in hot water and soap. Then come back in a few minutes lightly scrub and rinse with clear hot water and set aside to air dry.
|
|
|
|
|
|
|
LSAT
|
|
Post subject: Re: Washing Stuff in Hot water | Posted: Tue Nov 17, 2020 4:37 am |
|
Joined: Tue Sep 05, 2017 9:40 am
Posts: 668
Location: WI
PAP Mask: F & P Simplus
PAP Machine: Airsense 10 Autoset
Pressure Setting: 12-20
|
When I do decide to wash its always in hot water...When I used the Quattro mask, I boiled the cushion every few months...I haven't tried it with my Simplus because the silicone is attached to plastic.
|
|
|
|
|
|
|
|
